Talleres y Aceros (TYASA), Mexico

ENKOTEC is looking forward to being a continuous partner in TYASA’s search for providing quality performance and quality products within nail manufacturing.

Quality Performance & Quality Products

Mid 80´s Talleres y Aceros (TYASA) was founded by Mr. Elias Chahín, installing a hot rolling facility in Orizaba, Veracruz, Mexico. The plant was extended at the end of the 80´s to include the first melt shop producing up to 320,000 tons/year of ribbed wire. 1997 saw a capacity increase in the melt shop and the installation of a wire rod mill to reach 450,000 tons/year of both ribbed wire and wire rod.

2006 was the year of the installation of the new wire plant DERIVADOS in Orizaba to process up to 48,000 tons/year of welded mesh, anneal wire and nails, since TYASA also decided to enter the nail market with the two biggest volume nails used ( 121” x 2 1/2”;and .161” x 4” ). ENKOTEC presented a solution of two NB nail manufacturing machines with an NCP packing solution to cover their production needs. Alternatively, five conventional machines would have been required in order to cover the same production demand, and TYASA would also have needed a tumbler operation and a packing line. The ENKOTEC solution provided all this inline due to no need for cleaning and the direct counting and packing solution by using the NCP machine installed at that time underneath the nail machines. The first ENKOTEC NB nail machines were delivered in the 1st quarter of 2006. The installation and training of the people at TYASA was done in only one week.

2007: Installation of DERIVADOS II in Mérida, Yucatán, as a distribution center to produce up to 18,000 tons/year of welded mesh. An increased demand for nails in the .121” x 2 1/2” segment made TYASA invest in ENKOTEC’s newly developed NX series nail machinery that increased the output by 20% from the NB platform. This also allowed TYASA to have one of its NB machine allocated to only running 161” x 4”, where it previously was needed to do frequent changeovers to meet the 121” demand with the two NB machines. TYASA’s first NX series machine was delivered in the 3rd quarter of 2007, this one also with NCP packing solution.

2008 saw the installation of a new wire rod mill and a bar mill, 2009 the installation of the new ribbed wire processing plant CAHA (Centro Avanzado de Habilitado de Acero) in Orizaba to produce engineering welded mesh, reinforced columns and ribbed wire bending, and 2012 the installation of a new distribution center in Arriaga, Chiapas, Mexico.

2013: The need for nails had increased and TYASA ordered their second NX machine for the production of .121” x 2 1/2” together with an updated NCP packing unit, more flexible for different box sizes and more mobile, if needed for other products. TYASA’s second NX nail machine was delivered in the 1st quarter of 2013. TYASA is now operating with 4 ENKOTEC nail machines and NCP solutions to secure their need for high volume precision nails.

2014: TYASA is installing a new state-of-the-art Quantum melting shop with a CC machine to reach 1,200,000 tons/year of bars, beam blank, billets (round and square) profiles. This is the first in the world of such kind and will definitely position TYASA in the front of steel production capabilities in the years to come, under the leadership of Mr. Oscar Chahín, Owner and Director. ENKOTEC is looking forward to being a continuous partner in TYASA’s search for providing quality performance and quality products.

www.tyasa.com 

We can support your business

This website uses cookies to improve your experience. We assume that this is ok, but you may opt out. Read more

Close