ENKOclean: KSN01 Nail Cleaning System
The ENKOTEC nail cleaning system - the ENKOclean: KSN01 - has been designed for cleaning nails in an in-line nail manufacturing production, or as a standalone unit, through a drum spiral, with a production speed of up to 2,000 nails per minute.
Features of the ENKOclean KSN01
- Perforated drum for cleaning, rinsing and drying
- Recycling cleaning section
- Recycling rinsing section
- Drying zone with hot air
- Suction fan Ø160 mm, 2800 rpm
- SIEMENS S7 PLC with KTP700 Colour control panel
Specifications and Datasheets
Ø2.0 – 4.2 mm
in nail diameter
25 - 130 mm
in nail length
350 - 550 kg/hour
in capacity
Product Datasheet:
Highly efficient washing with ENKOclean
The ENKOTEC nail cleaning system, type KSN01, has been designed for cleaning nails in an in-line nail manufacturing production, or as a standalone unit, through a drum spiral, with a production speed of up to 2,000 nails per minute.
The capacity is depending on the nail size. The system washes by high pressure, cascading the nails in a cleaning and corrosion-preventing chemical solution at 60°C. The nails then travel into a rinsing zone with clean water of 60°C and, as the last step of process, a drying zone with 120°C hot air at high pressure.
A closed and insulated construction of the machine reduces the noise and heat level to minimum. The design is service-friendly and the construction allows quick access to all the vital machine parts.